Lift the upper edge of the liner away from the graphic and fold back approximately 3-6 inches (depending on the size of the graphic).
Position the image on the window, completely remove the liner, and slide to align on all sides. The window must be wet enough to prevent the graphic from sticking until it's positioned.
Using the provided felt squeegee or your hand lightly press the material in place. Start from the middle of the graphic and squeegee toward the outside edges to remove all excess water or air bubbles.
Lift the upper edge of the liner away from the graphic and fold back approximately 3-6 inches (depending on the size of the graphic).
Place the adhesive side of the graphic onto the wall, window, or intended
application surface. Carefully position the material to align on all sides. Then
press the upper corners in place using light pressure.
Using your hands or a squeegee, lightly press the material in place, pushing
all air bubbles out. *Please note, during installation you can reapply if using a
repositionable material (Re-stick or Easy Grip). Gently pull diagonally at a 45-degree
angle and reposition to reapply.
Working from the top of the graphic to the bottom, continue by peeling away
more of the liner and applying light pressure. Continue in this manner until the
liner is completely removed and the graphic is in place.